Description
The Touch Sensor Power Switches allow you to run on/off the power for each of the three extended outlets or USB ports with a touch of a finger.
Adjustable brightness allows you to choose between 9 levels of brightness for the backlighting of the switches.
The Start-up Delay feature allows you to specify the length of delay time for 1-30 secs. before the device switches on.
Auto Power-off allows you to specify the length of time for 1-120 mins. until the device will automatically power off after the engine shuts off. This feature is especially useful for vehicles with an “always on” type of cigarette lighter socket.
Manually or Automatically switching the four display modes: 1) car battery voltage, 2) USB output Amp reading, 3) Timer 4) Temperature* (optional, requires temperature sensor NOT INCLUDED)*.
Temperature Display (requires temperature sensor)
Power status memory for the Touch Sensor Switches & The Master Power Switch. Both the four touch sensor power switches and the master power switch are capable of remembering their ON or OFF status when the device is powered off and restore to their previous status when the device is powered up again.
SPECIFICATIONS:
Input Voltage: DC 10V-25V Load Capacity for Outlets: 6A(72W) for Single / 9A (108W) for Total
USB Output (Max): DC5V, 2.4A (Single) / 3.4A (Total)
Overload Protection for the Outlets
Overcurrent Protection for The USB Ports
Low Voltage Warning
Start-up Delay Timer: 1-30 Sec
Automatic Power-off Timer: 1-120 Min
Temperature Display Range: -50°C+120°C
(BDP) Battery Discharge Prevention / Low Voltage Cut-off, Selectable: 11.0V-14.0V
NB! THIS DEVICE IS INTENDED TO OPERATE ELECTRICAL APPLIANCES ONLY AND CANNOT BE USED TO HEAT UP CIGARETTE LIGHTERS OR MOTORIZED APPLIANCES WITH VERY HIGH POWER, such as tire inflators etc. are not suggested to operate on this device.
